Sill seal was installed in between the concrete foundation and the sill plate to reduce air infiltration. Sill seal was installed all around the house. A termite shield was installed between the foundation and the sill plates’ wooden components that are joined to the foundation. The termite shield is a metal barrier shaped in a way that diverts water from running down the face of the wall and eliminates the movement of termites from the soil into wood framing members. The garage was framed out with 2×6’s and engineered framing materials to create open and useful spaces. The 2-car garage also has a back portion that is designated for the homeowner’s motorcycle collection. I-joists were installed in the garage to support the bonus room above the garage. The end of the parallel strand lumber (PSL) beam was cut to create the opening for the stairwell. The PSL beam allows the floor to end so that the motorcycle section of the garage is open to the above. PSL’s are strong and have a high load carrying ability. While the garage was being framed out, the crew started on the rest of the house. The garage roof slopes in a way that adds dimension to the roofline and style to the entire structure. This roofline, along with the motorcycle collection, help define the atmosphere of the garage. The beam in the picture below was salvaged from one of the barns on the property. This is just one of the many reclaimed/found items that the owners wanted our design team to incorporate in the design of their house. The beam was repurposed and used to create the entryway from the foyer into the office.